FORWARD USA FLAG RED AND BLUE SOLAS 3.5"X2" WITH VELCRO® BRAND FASTENER COL#396

Description

COLLECTABLE #396
FORWARD FACING USA FLAG RED AND BLUE ON REFLECTIVE SOLAS 3.5” X 2” MATT FINISH
.50 EACH
with
First Class Mail shipping, additional patches ship free.
SOLAS areas reflect brightly when viewed with infrared equipment.
If you served in
Iraq
or
Afghanistan
this is probably the same kind of patch you used.
We do not recommend these patches for use in the field, they are only for collecting.
Please purchase SolasX patches for use in the field.
Many of the patches considered Collectable patches are uncommon patches, printed for individual units or branches of the military.
Many patches have only a limited quantity available for purchase.
All of the patches considered collectable are older patches.
The patches labeled as “Old Tan” and “Gloss Finish” were printed before 2007.
Patches that have a Matt finish were printed after 2007 but before we switched over to the SolasX printing process.
All of the Collectable patches are considered “Printing Seconds” and may have printing blemishes or other defects.
Printing seconds must not be bent or the topcoat will crack.
All of our Printing Seconds are guaranteed to look good at a reasonable distance.
These are the same type of patches used by the
US
Military. The patches were manufactured in our factory here in the
USA
.
Every step of the process is done here at Anytime Sign, artwork, screen printing, and die cutting.
We use the best quality materials and printing techniques:
3M
®
Brand Solas is approved by the U.S. Coast Guard as a retro reflective material used to enhance visibility of life saving equipment in nighttime, or low light conditions.
3M
®
brand Solas reflects brightly when viewed with night vision equipment, providing crystal-clear friend or foe identification.
The
VELCRO® BRAND FASTENER we use has the highest quality acrylic-based adhesive glue and is able to withstand extremely hot climates. HOOK SIDE ON THE BACK OF THE PATCH ONLY, WE DO NOT PROVIDE THE LOOP SIDE .
VELCRO® BRAND FASTENER 330 PSA 0172.
Solvent Based Inks.
All the inks we use on our patches are Solvent Based.
Solvent based inks are better than digitally printed or UV inks because they adhere better and have a thicker ink deposit.
Solvent based inks will not fade, even if they are left outdoors for years.
VELCRO® is a registered trademark of Velcro BVBA, used with permission.