-40%

Sidewinder 3/8" U-cut Molded Curved Fuel Line Rubber Hose Elbow 45 90 180 10mm

$ 10.53

Availability: 639 in stock

Description

Sidewinder is a custom shaped fuel line available exclusively from us at RetroMotion Innovations! We designed this "swan shape" molded hose to be cut to a variety of angles needed to route fuel or oil.  It can be cut into 4 pieces for your project to give you 45, 90, 135, and 180 degree bends.
Reinforced molded rubber hose for carburetors and fuel injection systems with up to 75 PSI working pressure.  This will fit 3/8" and 10mm hose barbs and hard fuel supply lines from tanks to carburetors.  This is fuel-grade hose that meets and exceeds the SAE J30R7 specifications.  You can cut any section out of this hose and use any part of it, just trim to length and tighten with hose clamps (clamps not provided).  If desired, the printing on the hose can be wiped away with lacquer thinner for a cleaner look.
Dimensions:
Inner Diameter: .375" (9.5 mm)
Outer Diameter: .65"
Specs:
Built to SAE J30R7 For Permeability
Working pressure: 75PSI
Burst Pressure: 250 PSI
Temperature Range: -40°F to +257°F (-40°C to +125°C)
Applications: Fuel Injection, Low Pressure Gasoline, Diesel, Ethanol E10, E85, PCV Emissions Hose, Oil
NOT for submerged "in- tank" use